第 33 卷第 5 期Vol. 33 No. 5
2003 年 10 月Oct 2003

所属栏目:其它

高效絮凝剂聚合氯化硫酸铁的制备工艺条件
卫艳新; 侯曼玲(中南大学化学化工学院; 湖南长沙)
摘 要:采用正交实验法 ,利用钛白副产物FeSO4 ·7H2 O为主要原料 ,在HCl H2 SO4 混酸的介质中 ,以KClO3做氧化剂 ,制备高效絮凝剂聚合氯化硫酸铁 (PFSC)。其工艺条件为 :FeSO4 ·7H2 O∶H2 SO4 ∶HCl∶KClO3=17∶1 6∶1 2∶1 2 ,6 0~ 70℃时常压反应 1h ,再保温熟化 1h。并将该产品与聚合硫酸铁 (PFS)用来处理某池塘废水 ,对比发现 ,PFSC的絮凝效果优于PFS。
关键词:絮凝剂; 聚合氯硫酸铁; 钛白副产物
中图分类号:TQ138.1+1  文献标识码:A  文章编号:1009-9212(2003)05-0039-02
Techonological Conditions of Preparation of a Kind of High Efficient Flocculant-Poly-Ferric Sulfate Chloride
WEI Yan-xin; etc.(College of Chemistry and Chemical Engineering; Central South University; Changsha Hunan 410083; China)
Abstract:Using orthogonal method, and using FeSO_4·7H_2O and H_2SO_4 as raw material, technological condition of preparation of poly-ferric sulfate chloride with KClO_3 oxidation was obtained. The conditions are that molar ratio of FeSO_4·7H_2O, H_2SO_4, HCl and KClO_3 is 17∶1.6∶1.2∶1.2, the reaction temperature is 60~70?℃, the time is 1?h, and the keeping time is 1 h at 60~70?℃ under the ordiary pressure. The waste water in a pool was treated by poly-ferric sulfate chloride(PFSC) and PFS. The result shows that PFSC...
Key words:flocculant; poly-ferric sulfate chloride; ferrous sulfate septihydrate
收稿日期:2003-05-14
阅读全文